110 ampX Set
07171 87 12 0
Details
The products and extras at a glance
- nuVero 110
- nuConnect ampX
- Suitable speaker cable
- Warranty extension to 5 years (only applies to Nubert amplifiers, Nubert active loudspeakers and Nubert subwoofers)
nuVero 110 - slim beauty with low bass qualities
The nuVero 110 is a floorstanding loudspeaker that is unrivalled in terms of sound quality. Thanks to the D'Appolito arrangement of the midrange drivers around the tweeter, the result is an unrivalled fidelity and a wide, enchanting sound stage. To complete the interplay, three 150 mm woofers provide a bass response down to 32 Hz. Let yourself be enchanted by the sound of the nuVero 110 and transported into the realm of music.
nuConnect ampX - compact integrated amplifier with impressive performance
The nuConnect ampX is a fully digital integrated amplifier that offers two 130 W outputs with a width of 23.4 cm. It offers one analogue input, two coaxial and two optical digital inputs, as well as a USB DAC and an HDMI ARC port. Of particular interest is the high-quality phono preamplifier, which boasts outstanding noise behaviour and the ability to switch between MM and MC. The picture is rounded off by support for Bluetooth aptX HD and our in-house wireless standard. This means that not only passive speakers can be used, but also nuPro X speakers. The nuConnect ampX thus becomes a smart hub.
Nubert electronic GmbH
Nubertstraße 1, 73529 Schwäbisch Gmünd, Deutschland
Email: info@nubert.de Phone: +49 07171 - 8712-0
nuVero 110
Safety Instructions
- Turn off the amplifier before connecting the speaker cables.
- Ensure the speaker cables are firmly secured.
- Only place the speaker in a dry location.
- Avoid exposing the speakers to direct sunlight.
- Overload: The nuVero 110 features internal safeguards against amplifier-induced overload. However, even a low-powered amplifier can damage a speaker. At high volumes, weak amplifiers may produce distortions that heavily strain the tweeters. If the sound becomes distorted at any point, please reduce the amplifier's volume.
- Tipping Hazard: Due to its slim design, the nuVero 110 is at risk of tipping over sideways. It should never be used without the included traversing feet.
Cold Weather and Sound
When speakers are shipped or delivered during cold weather, they must adapt to room temperature before use. Low temperatures significantly impact the moving parts of a speaker, such as the diaphragm/voice coil, surround, and spider. These components may not perform optimally, affecting sound quality. This is not harmful but prevents the speakers from delivering their best performance.
Tip: If your new speakers arrive on a cold winter day, give them a few hours to acclimate. Your Nubert speakers will reward you with the outstanding sound quality you expect from us.
Warning
The threaded inserts are only for mounting the traversing feet! They are not designed for tensile loads and should not be used for hooks or similar mounts to suspend the speaker.
Setting Up the Speaker
All steps for unpacking and setting up the nuVero 110 are explained in a separate included DIN A3 information sheet.
Due to the weight of the nuVero 110, always handle it with two people! After unpacking the box and attaching the traversing feet, be sure to protect your flooring by placing protective materials like cardboard under the edges of the feet before positioning the speaker!
- Take one of the cardboard angles from the packaging.
- Slide it under the lying speaker as shown, so that the traversing foot rests on the cardboard angle.
- Carefully tilt the speaker upward using the cardboard angle until it stands securely. Then, gently remove the cardboard strips.
Connection Instructions
Please ensure your amplifier/receiver is turned off before connecting the speakers. Refer to the device's user manual for instructions on connecting the speakers to the amplifier/receiver.
Care and Cleaning Tips
Attention!
Improper handling of the speaker may cause damage.
- Turn off your amplifier and, if necessary, disconnect the speaker cables from the terminal before cleaning the speaker!
- Ensure all connections are correct, there are no short circuits, and the speaker is completely dry before resuming operation!
- Do not use harsh cleaning agents or solvents such as gasoline, alcohol, or similar substances!
Cabinet
For nuVero cabinets, we recommend using a standard glass cleaner sprayed onto a cotton cloth to remove fingerprints and dirt effortlessly. Alternatively, use window active foam. Avoid microfiber cloths, as they may cause micro-scratches on the surface. For veneered cabinets, use suitable furniture care products.
Membranes and Speaker Chassis
To remove dust from a speaker chassis, use a lint-free cotton cloth and gently wipe the diaphragm with very light pressure. The tweeters of all Nubert speakers are equipped with a protective grille, allowing them to be wiped with light pressure as well. If dust cannot be completely removed, a makeup brush from a drugstore may be suitable.
Stands and Traverses
For cleaning stainless steel surfaces, plant gloss spray has proven to be an excellent choice. Rub or polish with a cotton cloth.
nuConnect ampX
Safety Instructions
Before connecting and operating the device, carefully read the user manual and, in particular, its safety instructions. For your own safety, follow all warnings and safety instructions in this manual and on the speaker. Do not perform any actions on the speaker other than those described. Keep this document in a safe place where it is always accessible. Additionally, ensure it is passed on to potential future owners.
Intended Use
This speaker is intended solely for audio playback in dry indoor environments. Use the speaker only as described in this manual. Any other use (especially safety-critical or medical applications, outdoor installations like those involving specifically IP-certified products) is considered improper and may lead to property damage or even personal injury. Nubert electronic GmbH accepts no liability for damages caused by improper use.
General Notes
Never operate the speaker unattended!
Risk of Suffocation!
Never leave children unsupervised with the speaker or packaging materials! There is a risk of children becoming entangled in the packaging film and suffocating. Ensure that children cannot detach small parts from the device! These parts could be swallowed and cause suffocation. If parts are swallowed, consult a doctor immediately!
Caution!
To avoid the risk of damage to the speaker, do not open it. There are no user-serviceable parts inside the speaker. Service and repairs should only be performed by qualified technicians authorized by Nubert. In case of service, contact Nubert electronic GmbH!
Caution!
Operating the speaker despite damage may cause further malfunctions. If any of the following conditions occur, take the speaker out of operation immediately. Contact Nubert electronic GmbH!
- The speaker has been damaged or has fallen.
- Objects or foreign materials have entered the device.
- The speaker emits a burning smell, produces smoke, or makes unusual noises.
Setup Instructions
Risk of Injury or Damage!
When moving the speaker, handle it with care to avoid injuries and damage!
Caution!
An unstable setup location may cause damage to the speaker.
- Place the speaker only on a stable, level surface and ensure it cannot be knocked over!
- Ensure no unintended pull on cables to prevent tipping over the speaker or damaging connectors!
- Keep the speaker free from strong mechanical vibrations!
Caution!
Excessive heat buildup inside the device may shorten its lifespan or cause a fire. Heat exposure to speaker surfaces may also cause damage.
- Do not operate the speaker near heat sources such as radiators or stoves!
- Do not expose the speaker to direct sunlight!
- Never place burning candles or similar open flames on the speaker!
Caution!
Moisture can damage the speaker.
- Use the speaker only in dry environments!
- Do not operate it outdoors or in damp areas!
- Protect the speaker from all kinds of liquids, including dripping or splashing water.
- Do not place containers with liquids (e.g., flower vases) on or near the speaker!
- If the speaker is brought from a cold environment into a warm room, condensation may form inside. Wait at least 6 hours before switching it on, ensuring it has reached room temperature and is completely dry!
- Do not use the speaker during rapid temperature changes!
Setup Instructions
Risk of Injury or Damage!
When moving the speaker, handle it with care to avoid injuries and damage!
Caution!
An unstable setup location may cause damage to the speaker.
- Place the speaker only on a stable, level surface and ensure it cannot be knocked over!
- Ensure no unintended pull on cables to prevent tipping over the speaker or damaging connectors!
- Keep the speaker free from strong mechanical vibrations!
Caution!
Excessive heat buildup inside the device can shorten its lifespan or cause a fire. Heat exposure to speaker surfaces can also cause damage.
- Do not operate the speaker near heat sources such as radiators or stoves!
- Do not expose the speaker to direct sunlight!
- Never place burning candles or similar open flames on the speaker!
Caution!
Moisture can damage the speaker.
- Use the speaker only in a dry environment!
- Do not operate it outdoors or in damp areas!
- Protect the speaker from all kinds of liquids, including dripping or splashing water.
- Do not place containers with liquids (e.g., flower vases) on or near the speaker!
- If the speaker is brought from a cold environment into a warm room, condensation may form inside. Wait until the speaker has reached room temperature and is completely dry before switching it on!
Connection Instructions
General Connection Notes
- Unplug the power cords of all system devices before making any changes to the wiring!
- Ensure all connections are correctly made and securely seated before connecting the devices to the power supply!
- Use only the designated cables and connectors for connections! Using improper cables may result in damage or malfunction.
- When disconnecting cables, always pull on the plug, not the cable!
- Ensure all plugs fit securely into their sockets!
- Use only cables and accessories recommended by Nubert!
Caution!
Disconnect your amplifier/receiver from the mains before connecting the speakers! Refer to the amplifier/receiver manual for detailed instructions on connecting speaker cables.
Care and Cleaning Tips
Caution!
Improper handling of the speaker can cause damage.
- Always unplug the speaker before cleaning!
- Ensure the speaker is completely dry, and all connections are correctly made with no short circuits before resuming operation.
- Do not use sharp cleaning agents or solvents such as gasoline, alcohol, or similar!
Housing
We recommend using standard glass cleaner sprayed onto a cotton cloth. This effectively removes fingerprints and dirt. Alternatively, you can use foam-based glass cleaners. Avoid using microfiber cloths, as they may cause micro-scratches on the surface.
Speaker Membranes and Chassis
To remove dust from a speaker chassis, use a lint-free cotton cloth and gently wipe the membrane with very light pressure. The tweeters on all Nubert speakers are equipped with a protective grille, so they can also be wiped gently. If dust cannot be completely removed, a makeup brush from a drugstore is suitable.
Safety Instructions
Before connecting and operating the device, carefully read the user manual and, in particular, its safety instructions. For your own safety, follow all warnings and safety instructions in this manual and on the device. Do not perform any actions on the device other than those described. Keep this document in a safe place where it is always accessible. Additionally, ensure it is passed on to potential future owners.
Intended Use
This device is intended solely for audio playback in dry indoor environments. Use the device only as described in this manual. Any other use (especially safety-critical or medical applications, or outdoor installations involving IP-certified products) is considered improper and may lead to property damage or personal injury. Nubert electronic GmbH accepts no liability for damages caused by improper use.
General Notes
Never operate the device unattended!
Risk of Electric Shock!
To avoid the risk of electric shock, do not open the device. There are no user-serviceable parts inside. Service and repairs should only be performed by qualified technicians authorized by Nubert. In case of service, contact Nubert electronic GmbH directly (info@nubert.de)!
Risk of Suffocation!
Never allow children to use the device or remote control unsupervised, or to play with the packaging! Children may become entangled in packaging film and suffocate. Ensure that children cannot detach small parts from the device, such as batteries from the remote control. If parts are swallowed, consult a doctor immediately!
Risk of Injury or Damage!
When moving the device, handle it carefully to avoid injuries and damage!
Caution!
Since the device can only be completely disconnected from the mains by unplugging the power cord, ensure free access to the power socket or plug at all times. If any of the following conditions occur, switch off the device immediately and unplug it. Contact Nubert electronic GmbH (info@nubert.de):
- The device has been damaged or has fallen.
- The power cable or plug is damaged.
- Objects or liquids have entered the device.
- The device has been exposed to excessive moisture or rain.
- The device does not function properly or shows a significant performance reduction.
- The device emits a burning smell, produces smoke, or makes unusual noises.
Setup Instructions
Caution!
An unstable setup location may cause damage to the device.
- Place the device only on a stable, level surface and ensure it cannot be knocked over!
- Ensure there is no unintended pull on cables to prevent tipping the device or damaging connectors!
- Keep the device free from strong mechanical shocks!
Caution!
Excessive heat buildup inside the device can shorten its lifespan or cause a fire.
- Never cover the device’s ventilation openings! Ensure at least 10 cm of clearance around the device for proper air circulation.
- Do not operate the device near heat sources such as radiators or stoves!
- Do not expose the device to direct sunlight!
- Never place burning candles or open flames on the device!
Risk of Explosion!
Placing the device in unsuitable environments may cause explosions. Do not use the device:
- In fire or explosion-prone areas!
- At extremely low or high temperatures!
- Near flammable gases or vapors!
- In excessively dusty environments!