nuVero 110

Safety Instructions

• Turn off the amplifier before connecting the speaker cables.
• Ensure the speaker cables are firmly secured.
• Only place the speaker in a dry location.
• Avoid exposing the speakers to direct sunlight.
• Overload: The nuVero 110 features internal safeguards against amplifier-induced overload. However, even a low-powered amplifier can damage a speaker. At high volumes, weak amplifiers may produce distortions that heavily strain the tweeters. If the sound becomes distorted at any point, please reduce the amplifier's volume.
• Tipping Hazard: Due to its slim design, the nuVero 110 is at risk of tipping over sideways. It should never be used without the included traversing feet.

Cold Weather and Sound

When speakers are shipped or delivered during cold weather, they must adapt to room temperature before use. Low temperatures significantly impact the moving parts of a speaker, such as the diaphragm/voice coil, surround, and spider. These components may not perform optimally, affecting sound quality. This is not harmful but prevents the speakers from delivering their best performance.

Tip: If your new speakers arrive on a cold winter day, give them a few hours to acclimate. Your Nubert speakers will reward you with the outstanding sound quality you expect from us.

Warning

The threaded inserts are only for mounting the traversing feet! They are not designed for tensile loads and should not be used for hooks or similar mounts to suspend the speaker.

Setting Up the Speaker

All steps for unpacking and setting up the nuVero 110 are explained in a separate included DIN A3 information sheet.

Due to the weight of the nuVero 110, always handle it with two people! After unpacking the box and attaching the traversing feet, be sure to protect your flooring by placing protective materials like cardboard under the edges of the feet before positioning the speaker!

1. Take one of the cardboard angles from the packaging.
2. Slide it under the lying speaker as shown, so that the traversing foot rests on the cardboard angle.
3. Carefully tilt the speaker upward using the cardboard angle until it stands securely. Then, gently remove the cardboard strips.

Connection Instructions

Please ensure your amplifier/receiver is turned off before connecting the speakers. Refer to the device's user manual for instructions on connecting the speakers to the amplifier/receiver.

Care and Cleaning Tips

Attention!

Improper handling of the speaker may cause damage.

• Turn off your amplifier and, if necessary, disconnect the speaker cables from the terminal before cleaning the speaker!
• Ensure all connections are correct, there are no short circuits, and the speaker is completely dry before resuming operation!
• Do not use harsh cleaning agents or solvents such as gasoline, alcohol, or similar substances!

Cabinet

For nuVero cabinets, we recommend using a standard glass cleaner sprayed onto a cotton cloth to remove fingerprints and dirt effortlessly. Alternatively, use window active foam. Avoid microfiber cloths, as they may cause micro-scratches on the surface. For veneered cabinets, use suitable furniture care products.

Membranes and Speaker Chassis

To remove dust from a speaker chassis, use a lint-free cotton cloth and gently wipe the diaphragm with very light pressure. The tweeters of all Nubert speakers are equipped with a protective grille, allowing them to be wiped with light pressure as well. If dust cannot be completely removed, a makeup brush from a drugstore may be suitable.

Stands and Traverses

For cleaning stainless steel surfaces, plant gloss spray has proven to be an excellent choice. Rub or polish with a cotton cloth.

NAD M33

Safety Instructions

1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water—for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table.
9. Cart - A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation to ensure reliable operation and to protect it from overheating.
11. Power Sources - This product should be operated only from the type of power source indicated on the marking label and connected to a MAINS socket outlet with a protective earthing connection.
12. Power-Cord Protection - Power-supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them.
13. Mains Plug - Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
14. Outdoor Antenna Grounding - Ensure the antenna or cable system is grounded to provide protection against voltage surges and static charges.
15. Lightning - Unplug the product during a lightning storm or if left unused for long periods of time to prevent damage.
16. Power Lines - Ensure that an outside antenna system is located away from overhead power lines to avoid fatal accidents.
17. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles.
18. Flame Sources - No naked flame sources, such as lighted candles, should be placed on the product.
19. Object and Liquid Entry - Never push objects into the product or spill liquids on it to avoid short circuits or electric shock.
20. Headphones - Excessive sound pressure from headphones can cause hearing loss.
21. Damage Requiring Service - Unplug the product and seek qualified service personnel under certain conditions:
    • When the power-supply cord or plug is damaged.
    • If liquid has been spilled, or objects have fallen into the product.
    • If the product has been exposed to rain or water.
    • If the product does not operate normally by following the operating instructions.
    • If the product has been dropped or damaged in any way.
    • If the product exhibits a distinct change in performance.
22. Replacement Parts - Use only replacement parts specified by the manufacturer to prevent hazards such as fire or electric shock.
23. Battery Disposal - When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
24. Safety Check - After any service or repairs, ask the technician to perform safety checks to ensure proper operation.

Warning

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Caution

• To maintain proper ventilation, leave a space around the unit: Left/Right: 10 cm, Rear: 10 cm, Top: 10 cm.
• Changes or modifications not approved by NAD Electronics could void the user’s authority to operate this equipment.
• To prevent electric shock, match wide blade of plug to wide slot, fully insert.
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• Ensure the appliance with a protective earth terminal is connected to a mains outlet with a protective earth connection.

FCC Statement

This equipment complies with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. If interference occurs, try the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different circuit outlet.
• Consult the dealer or an experienced radio/TV technician for help.

If in doubt, consult a competent electrician.