AVM Audio Ovation A 8.3
Orderable on request
€14,990.00
07171 87 12 0
Product
The A 8.3 at a glance
Exclusive OVATION 803 T tube technology
- 2 x 200 W 8 Ohm / 2 x 330 W 4 Ohm
- Class A / AB high-current MOS FET technology, adopted from the OVATION SA 6.3 stereo amplifier
- 20 MOS-FET transistors per channel supply max. 180 amps.
- Power amplifier with 1000 VA torodial transformer
- 4 separate power supply units: Mains, processor unit, silent power supply for input circuit left and right
- The consistent dual-mono design avoids mutual interference between the channels
- Analogue and true balanced input stages, fully DC-coupled
- 2 variable preamplifier outputs (XLR & RCA / Cinch), 1 fix line out (RCA / Cinch)
- Loudspeaker A / B (separately switchable) with extremely stable loudspeaker connections
- 5 high-level inputs: 1 x XLR balanced + 4 x RCA unbalanced
- 5 digital inputs: 1 x Cinch coax, 2 x TOSLINK Opto, 1 x USB with up to 384 kHz / 32 bit and DSD128 (via USB)
- Bluetooth 4.2
- Signal-sensitive inputs switch on A 8.3 / A 6.3 with incoming signal (1 x analogue cinch, 1 x digital coax, 1 x digital opto)
- Prepared for optional ARC module
- Home Cinema / AV Bypass
- 2 x Trigger Out (10V)
- Tone control incl. parametric volume and bypass function
- Separate class A headphone amplifier with 6.3 mm jack
- Connection for external IR receiver
- Large, blue luminescent graphic display
- Extensive menu functions (adjustable input sensitivity, individual input naming and much more)
- Including RC 3 remote control made of solid aluminium
(Source: www.avm.audio.de)
Safety Instructions
Audio Video Manufaktur GmbH
Daimlerstr. 8, 76316 Malsch, Deutschland
Email: info@avm.audio Phone: +49 (0) 7246 309910
NOTE
Please keep the device turned off until all cable connections to the system have been completed. If the device is cold after unpacking from transport, place it in your listening room without connecting it to power for about an hour to allow it to adjust to room temperature.
NOTE
If using banana plugs, tighten the outer parts of the connectors clockwise before inserting them to avoid rattling noises during operation. If using bare wire ends or spade terminals, turn the outer parts of the connectors counterclockwise to the stop, insert the stripped wire ends or spade terminals into the designated openings in the speaker terminals from below, and then tighten the outer parts of the connectors by turning clockwise.
NOTE
The device is not completely disconnected from the power supply when in standby mode. To fully disconnect it, switch off the power switch on the back of the device or unplug the power cable from the socket.
NOTE
If a digital source is selected but no compatible signal is present, volume control (manual or via remote) is disabled for safety reasons (to prevent accidental volume increase to maximum).
NOTE
Please note that the remote control is disabled during the gain adjustment process.
NOTE
Ensure that no liquid enters the interior of the housing during cleaning. For safety reasons, unplug the power cable before wiping with a damp cloth. Do not use solvents or abrasive cleaners, as they may damage the surface or markings.
Accessories
We offer not only a wide range of HiFi equipment, but also the appropriate accessories.
Recommendations
We have many combinations of HiFi devices in our stores in test, our recommendation harmonize in the best possible way. Promised!
Downloads
Technical Information
| Device type: | Stereo integrated amplifier |
|---|---|
| Width: | 43,0 cm |
| Height: | 13,0 cm |
| Depth: | 39,0 cm |
| Weight: | 19,0 kg |
| Shipping weight: | 24,0 kg |
| Power consumption in standby mode: | 0,5 W |
| Power consumption in idle mode: | 75 W |
| Maximum power input: | 1.500 W |
| Standard colour: | Black |
| Scope of delivery: | Ovation A 8.3 integrated amplifier, mains cable, RC 3 remote control |
| Country of origin: | Germany |
| Min - Max impedance: | 4 Ohm |
| Continuous power: | 2x 330 W into 4 Ohm |
| Channels: | 2 |
| Power amplifiers: | Tube amplifier Ovation 803 T |
| Remote control: | IR remote control |
| Operation on the device: | Buttons and dials |
| Digital coaxial inputs: | 2 |
| Digital optical inputs: | 2 |
| USB inputs: | 1x USB type B |
| Bluetooth: | Yes |
| XLR inputs: | 1 |
| Audio cinch inputs: | 4 |
| XLR outputs: | 1 (Symmetrical R + L) |
| Audio cinch outputs: | 1 |
| Headphone outputs: | 1x 6.35 mm jack |
| Audio Pre-Out: | 2 (1x Audo Cinch / 1x XLR) |
| Loudspeaker outputs: | 4 (pair A+B) |
| Bluetooth version: | Version 4.2 |
| Trigger outputs: | 2x 5 V mini-jack |