AVM Audio : Ovation SA 8.3 silber
Orderable on request
€19,990.00
07171 87 12 0
Product
The SA 8.3 at a glance
- Award-winning single-ended stereo power amplifier with > 2 x 350 W 4 Ohm
- Unlimited power reserves with 2 toroidal transformers (2 x 1000 VA)
- Balanced OVATION 803 T tube input stage
- Separate analogue transformers L/R with 1kVA each
- Ultra-short signal paths: electrolytic capacitors integrated on the output stages, 200,000µF each per channel
- 24 high-current MOS FETs per channel
- Cinch inputs with sockets made of solid, gold-plated copper
- Automatic on/off switch
- AIR Trigger (AVM Intelligent Remote)
- Trigger input 5V to 20V
- USB software update port
- Serial RS232 interface
- Transparent OVATION glass lid
- Optional chrome front on request
(Source: www.avm.audio.de)
Safety Instructions
Audio Video Manufaktur GmbH
Daimlerstr. 8, 76316 Malsch, Deutschland
Email: info@avm.audio Phone: +49 (0) 7246 309910
WARNING
Ensure that small children do not accidentally burn themselves by touching the power amplifier. Also, be aware that sensitive items (e.g., candles, plastics, vinyl records) can be damaged by the heat emitted.
NOTE
Please keep the device turned off until all cable connections to the system have been established. If the device is still cold from transport after unpacking, place it in your listening room without connecting it to the power supply for about an hour to allow it to adjust to room temperature.
WARNING:
Important electrical safety information: Depending on the connected speaker and required output power, the amplifiers can draw up to 3500 watts from the power grid, with a current consumption of up to 16 amperes. Therefore, standard power cables (maximum current 10 amperes) are not suitable. The included power cable is rated for up to 16 amperes. If you wish to replace the power cable, ensure that it is rated for at least 16 amperes and has a compatible device-side coupling (IEC-60320 C19).
NOTE
If your amplifier(s) are still cold from a previous transport, place them in your listening room without connecting them to the power supply for at least an hour to allow them to adjust to room temperature. Condensation could otherwise damage or destroy the device.
WARNING
Never connect or disconnect cables while devices are powered on. Doing so could damage the amplifier or other connected devices. Turn off the devices using the power switch or unplug them from the power supply beforehand.
WARNING
Ensure that no liquid enters the interior of the housing during cleaning. For safety reasons, unplug the power cable before wiping with a damp cloth. Do not use solvents or abrasive cleaners, as these could damage the surface or markings. The plexiglass cover is particularly delicate, so handle it with extra care.
Accessories
We offer not only a wide range of HiFi equipment, but also the appropriate accessories.
Recommendations
We have many combinations of HiFi devices in our stores in test, our recommendation harmonize in the best possible way. Promised!
Downloads
Technical Information
| Device type: | Stereo power amplifier |
|---|---|
| Width: | 43,0 cm |
| Height: | 25,0 cm |
| Depth: | 43,0 cm |
| Weight: | 42,0 kg |
| Shipping weight: | 47,0 kg |
| Power consumption in standby mode: | 1,0 W |
| Standard colour: | Silver |
| Color: | Aluminium Silver |
| Scope of delivery: | Ovation SA 8.3, mains cable, trigger plug |
| Country of origin: | Germany |
| Min - Max impedance: | 4-8 Ohm |
| Continuous power: | 2x 350 W into 4 ohms / 2x 200 W into 8 ohms |
| Channels: | 2 |
| Power amplifiers: | Tube amplifier Ovation 803 T |
| Operation on the device: | Keys |
| XLR inputs: | 1 |
| Audio cinch inputs: | 1 |
| Loudspeaker outputs: | 4 (for 1 pair) |
| Trigger inputs: | 1x 5 V mini-jack |