nuVero 50
Available, delivery time: 1-3 working days *
€685.00
07171 87 12 0
Product
nuVero 50
"The essence of music is to give pleasure" - Aristoteles
- Neutral wall-mounted loudspeaker for compact systems and surround systems with closed cabinet
- Flat speaker with 13 cm depth and stainless steel bracket for wall mounting with swivel option
- Can be used as a centre for homogeneous multi-channel sets with low space requirements
- Dolby Atmos ready: High-end ceiling speakers for even more details from above
- Convincing with sound selector switch, bi-wiring terminal and asymmetrical tweeter
- Made in Germany, nobly lacquered, incl. sound sail for optimal reproduction, with stainless steel bracket
Truly universal
The nuVero 50 can be used in a variety of ways. It can be mounted on walls or ceilings using the stainless steel bracket supplied, with a tilt angle of up to 90 degrees possible. The D'Appolito arrangement of the drivers guarantees a wide dispersion angle. The closed box has been specially designed for horizontal and vertical use and can be used both horizontally and upright. This means that nothing stands in the way of its use in stereo or in a completely homogeneous home cinema.
More language
Due to their special tuning, you can also operate the nuVero horizontally, as a centre for speech reproduction. This makes your surround set, which consists entirely of nuVero 50s, absolutely homogeneous.
More Surround
With 72 Hz lower cut-off frequency when wall-mounted, the nuVero 50 also cuts a fine figure as a rear speaker in surround, especially in combination with one of our nuSub woofer models.
More 3D sound
The pre-mounted stainless steel bracket makes it possible to mount the nuVero 50 on the ceiling. So nothing stands in the way of your ultimate Dolby Atmos system.
More stereo
Mounted vertically on a wall, the nuVero 50 combines elegance and refined sound. Thanks to its flat design, it is hardly noticeable in your living room, but its sound is all the more so.
Details
Tweeter
With the nuVero 50, the tweeter is coupled to the midrange at 1600 Hz. The tweeter of the nuVero series is designed for the widest possible dispersion. In combination with the optimised front plate, the dispersion is even wider. Your advantage: Larger sweet spot and wider stage coverage for a more authentic sound experience.
Low-midrange speaker
The nuVero 50's bass-midrange driver works seamlessly below the tweeter. It allows for detailed voice reproduction and rich low frequencies. Thanks to the optimised closed cabinet and ultra-longstroke technology, the wall speaker achieves a lower cut-off frequency of 72 Hz when wall-mounted.
Crossover
The crossover is the heart of the nuVero 50, with sophisticated components ensuring accurate reproduction and linear sound. The switches on the back directly influence the crossover, allowing seamless switching between sound modes or tuning for wall or free-standing mode. In addition, the crossover incorporates protection circuits to protect the drivers in the event of overload.
Closed construction
The compact and enclosed design allows the speaker to be mounted on a wall or ceiling without affecting the sound. This makes the nuVero 50 a true universal solution for surround systems. You can thus achieve maximum homogeneity with identical speakers.
Colours
Our nuVero series is a real eye-catcher. The cabinet is coated with Nextel® in black or white. This lacquer has a matt and velvety surface that can set accents both visually and haptically. The front is lacquered metallic in the colours ruby red, diamond black and crystal white.
Design
In the nuVero series, the appearance follows the optimal sound reproduction. The curved and wider baffle compared to the cabinet width ensures reduced edge dispersion and a wider dispersion pattern. At the same time, the elegant curves make for a more living-room-friendly design, so the grille has the same radius as the baffle.
Series overview
Our nuVero series is the culmination of over 45 years of speaker development. The models are genuine Made in Germany products that take honest sound to the extreme. The series comprises 7 models, ranging from dipole to wall-mounted and floorstanding speakers. The subwoofers of the nuSub series provide even more bass.
Committed to honest sound
We are a German company that has been developing and selling speakers directly for over 45 years. We stand for neutral reproduction so that you receive exactly the same signal that is present on the source. We add nothing and leave nothing out. We promise! You can find more information about our philosophy here.
Production locations
All nuVero models were perfected by our developers in Schwäbisch Gmünd. Series production then takes place exclusively for us at the Roterring manufacturing plant in North Rhine-Westphalia. This means that our nuVero series speakers are rightly labelled Designed and Made in Germany
This product as 2nd choice
In some installation locations - for example with rearspeakers behind a curtain - the visual appearance plays a subordinate role, but the function must be guaranteed without restriction. Here, our 2nd choice is the ideal solution for price-conscious customers. These are exhibition items, customer returns or discontinued models with minor signs of use, but which have been technically inspected by our service department. We also give a full 2-year guarantee on the 2nd choice.
Test results
We are awarded. And proud of it.
Accessories
We not only build exceptional loudspeakers and electronics, but also offer the matching accessories. So you can find everything useful for our products, from cables to adapters.
Our recommendations
Not the right one? We recommend taking a look at related products that you might like.
Downloads
FAQ's
Questions about passive speakers
You buy the product, then it arrives at your home and you can test it for 30 days without risk. If you don't like the product, you can return it free of charge and we will refund the total amount including all shipping costs.
In most cases, a quick look at the instruction manual is enough to solve many problems very quickly. We are happy to help you via phone +497171-87120 or E-Mail. according to the motto "It doesn't sound, it doesn't exist". Because for us, good service is part of the product.
Reviews
Login
Honest speakers - Honest reviews
Satisfied? Or can we do something better with our products? Then write us your review. Simply log in to your account and write the review of your order here.
Here with us, every review is checked for authenticity and is then approved. So you can be sure that the feedback you give us about our products is genuine.
19 February 2021
Einfach schön!
Ich muß gleich zu Anfang zugeben, das man in einem nuVero Set als Dolby Atmos/DTS:X Höhenlautsprecher, auch durchaus zu den günstigeren nuLine WS-14 greifen kann. Aber wer es auch mit der Optik ernst nimmt und keine Kompromisse eingehen möchte, greift natürlich zu den nuVero 50. Mit den nuVero 50 bekommt man insgesamt auch das bessere Gesamtergebnis, aber der klangliche Abstand ist für diesen Einsatz nicht so groß. Wer aber die nuVero 50 als Centerspeaker nutzen möchte, kann das durchaus tun und sollte in dem Fall keinen Gedanken an die andere Serie verschwenden. Als Centerspeaker genutzt, sollte in dem System allerdings ein Subwoofer mitspielen. Da würde ich mich dann mal bei den neuen XW700, 900, 1200 aus der nuSub Serie umsehen.
7 May 2021
Einsatz als Center
Ich hatte zur Zeit der Beschaffung ein 4.0 Systems, wollte testen ob der Phantomcenter für mich ausreichend sein sollte, da aus Platzgründen so viel wie nötig beschafft werden sollte, dann aber ordentlich (da langfristig gekauft). Der Phantomcenter war brauchbar, je nach Aufnahmequalität. Manchmal war es aber anstrengend, den Dialogen zu folgen. Obwohl ich schon den receiver und die Lautsprecher auf optimale Sprachverständlichkeit einstellte. Ich bekam also die Genehmigung meiner Regierung für einen weiteren Lautsprecher Da die Front bereits aus NuVero 60 bestand, musste wieder ein Nuveroprodukt her. Optimalerweise die Nuvero 70. Aber der Platzbedarf, vor allem in der Breite ist riesig. Das wäre für die Wohnzimmergestaltung einschneidend gewesen. Alternativen: NuVero 50 oder 60 stehend. Der Kundendienst hat mir von der stehenden Lösung abgeraten, da Mittel- und Hochtöner ja assymetrisch sind und sich daher nicht harmonisch ins Gesamtbild einfügen. Ich solle es mit der NuVero 50 versuchen. Wegen der Einschränkung im Tieftonbereich war ich skeptisch. Die eher kompakten Maße und fehlende Alternativen überzeugten mich jedoch. Versand rasch, Verpackung Top. Aufbau kannte ich jetzt, da wie bei den Frontlautsprechern. Das Gewicht und die Maße sind kompakt. Sehen für sich aber trotzdem groß aus (v.a. im Vergleich zu den aktuell beliebten Soundbars). Aufstellung bisher noch liegend auf dem Boden (suboptimal). Erste Hörprobe im Gesamtsystem: etwas mehr Sprachverständlichkeit. Nach Nachregulierung im Receiver mit Betonung des Centers (nun ja isoliert ansteuerbar) fand ich die für uns optimale Einstellung. Jetzt haben wir einen für uns ausgewogenen Genuß. Die Tiefen waren erst auf "freistehend", jetzt auf "wandnah". Ich bilde mir ein, dass die Stimmen so etwas voller wirken. Die Gitter sind eine gute Sache, da ein optimaler Kinderschutz. Mit dem montierten Bügel ist eine horizontale Positionierung möglich. Der Lautsprecher liegt dann auf dem Bügel sowie der Kante des Hörsegels. Einen größeren Center vermissen wir nicht. Da ich (auch Coronabedingt) nicht im Hörraum probegehört hatte, kann ich natürlich keine Vergleiche ziehen. Aber: Die Größe ist für uns optimal, das Gleichgewicht der Lautsprecherfront für uns gegeben, auch optisch. Akustisch sind wir zufrieden, auch auf verschiedenen Hörplätzen. Für uns das passende Produkt. Nebeneffekt: Die Kinder hören jetzt stundenlang Hörspiele. Der Center leistet hierfür wertvolle Dienste
5 November 2020
nuVero 50
Toller Klang, gute Optik, sehr schneller Versand
9 June 2020
nuVero 50
Ja, nun muß ich mich auch in den Kreis der Nubert-Lobhudler einreihen! Daß die TOP-Produkte der Firma noch weit besser sind als ihre Rankings in den Testzeitschriften, weiß jeder, der sie täglich hören darf. Daß die beratenden Mitarbeiter exzellent auf die Hörgewohnheiten und Raumgegebenheiten eingehen, anstatt ihr Verkaufsvolumen zu optimieren, ist einmalig. Daß der Service nach dem Kauf nicht aufhört, ist ungewöhnlich. - Ich hatte vor, mein kleines Arbeitszimmer akustisch auszubauen und stand vor der Frage Aktiv oder Passiv. Nachdem ich meinen "LS-Fuhrpark" aufzählte (NV 10, NV 110, A300 kabellos), kam der Vorschlag, anstelle der X-Serie (an die ich zuerst dachte) oder der NV 30 (die mich reizte) die NV 50 mit ATM zu betreiben. Also bestellt, an die Wand geschraubt, mit einer Pro-Ject-Kombi (RS2) verbunden - und nun? Ich bin mit der "Mikro-170er" im audiophilen Siebten Himmel! Die Boxen als Monitore angewinkelt, leicht an den Ohren vorbei, eröffnet sich eine unglaubliche Bühne an Präsenz, Prägnanz, Punktualität und Musikalität, die ihresgleichen sucht und durch Wand und Fenster zu spielen scheint. Ich hätte nie geglaubt, was mit diesen kompakten Lautsprechern an einem Schreibtisch möglich ist, vor allem beim Leisehören. Und bei Bedarf rocken sie auch schon mal die ganze Etage... Vielen Dank, Nubert-Team!!!
Technical information
Device type: | Wall-mounted loudspeaker |
---|---|
Width: | 17,2 cm |
Height: | 45,0 cm |
Depth: | 13,0 cm |
Width (additional information): | 20,3 cm (with sound sail) |
Height (additional information): | 47,0 cm (with sound sail) |
Depth (additional information): | 15,0 cm (with front cover) |
Weight: | 9,0 kg |
Packaging dimensions (W x H x D): | 60,0 cm x 27,0 cm x 28,0 cm |
Shipping weight: | 12,5 kg |
Standard colour: | White |
Color: | Crystal White |
Scope of delivery: | nuVero 50, metal cover, wall bracket, speaker cable 2x 0.75 mm² 4 m, operating instructions in German |
EAN / GTIN: | 4260166752403 |
Country of origin: | Germany |
WEEE-Reg. No.: | DE 48888173 |
Construction Method: | Closed |
Construction: | Direct radiator |
System: | 2-way |
Tweeter: | 1x 26 mm |
Tweeter material: | Silk fabric |
Tweeter crossover frequency: | 1.600 Hz |
Bass-midrange driver: | 2x 150 mm |
Bass-midrange material: | Glass fibre composite |
Lower cut-off frequency (-3 dB): | 90 Hz (free-standing) 72 Hz (wall-mounted) |
Upper cut-off frequency (-3 dB): | 25.000 Hz |
Efficiency (2.83V/1m): | 87,5 dB |
Efficiency (1W/1m): | 84,5 dB |
Continuous load capacity: | 180 W |
Pulse load capacity: | 280 W |
Shielding: | Magnetically compensated |
Impedance: | 4 Ohm |
Protection: | Self-resetting fuses |
Tone selector switch Treble: | Yes |
Loudspeaker inputs: | 2 |
Box type and recommendations for use
The nuVero 50 is a flat, universally usable high-end speaker as a satellite for surround sets or subwoofer satellite systems. It is particularly recommended for wall mounting because, unlike conventional speakers, it does not require a minimum distance from the rear wall in order to develop its sound optimally. A switch on the connection terminal allows the nuVero 50 to be configured both for free-standing installation and for operation close to the wall - the intelligent crossover is optimally tuned for both types of use.
In conjunction with the ATM-50 nuVero module, it develops a bass fullness comparable to a very good "30-litre class" speaker, even without a subwoofer.
Thanks to the supplied stainless steel bracket, the nuVero 50 is ideal as the main speaker next to a modern flat-screen TV or as a surround speaker in a home cinema system. For use as a centre speaker, horizontal mounting or placement directly under the screen is recommended.
With the supplied bracket, the nuVero 50 is also recommended as a ceiling speaker in a Dolby Atmos system with height channels. As with wall mounting, it is important to check in advance whether the surface will safely support the speaker and the bracket.
The speakers of the nuVero series are developed in Schwäbisch Gmünd and manufactured according to our specifications at a traditional specialist company for sound furniture construction in Germany.
Housing and design
The cabinet of the nuVero 50 is made of acoustically advantageous fibreboard (MDF) and has been elaborately damped to avoid disturbing resonances. The elegantly curved sound sail on the front not only enriches the appearance, but at the same time minimises sound-damaging edge dispersion in the midrange and treble. The removable protective grille is securely fastened with spacers using tried-and-tested rubber bushings. Matching colour covers for the bushings are available as accessories on request.
Tweeter
Designed from the ground up, the silk fabric dome extends the speaker's phenomenal resolving power even further, achieving unprecedented transparency and audibility in the upper frequency range. The 26-millimetre tweeter ensures outstanding omnidirectional response.
Low-midrange speaker
The two bass-midrange drivers use glass-fibre cones in a sandwich construction, which guarantees the perfect transition to powerful subwoofers due to their extremely wide excursion and the strong magnet systems. The two 150-millimetre drivers have die-cast aluminium baskets and generously ventilated voice coils, which ensure the high power handling.
Crossover
The crossover network optimally controls the drivers used. The filter network relies on high-quality components, including film capacitors with tight tolerances and long-term stability. A sophisticated protection circuit cuts the amplifier current to the chassis and crossover in the event of an impending overload and then automatically resets itself to normal operation.
Sound options
This loudspeaker is equipped with sound selector switches that allow the dispersion pattern to be adjusted to the surroundings or personal listening tastes with a simple flick of the wrist. This allows the nuVero 50 to be optimised for both near-wall and free-standing installation.
Connection terminal
The extremely solid, gold-plated screw terminals of the bi-wiring terminal are also suitable for cables with a very large cross-section. Bi-wiring terminals allow the tweeter and low/midrange to be connected separately to the amplifier. A measure that can prevent sound losses with long cable lengths.
More info in Technology
For all technically interested music and home cinema lovers who are not put off by hard facts and metrological details, Günther Nubert's "Technik satt" offers plenty of technical correlations and electro-acoustic background knowledge as well as the topic of sound optimisation and insights into the development and history of Nubert loudspeakers and devices.